Full Product Manual
3
13. Never use the grass trimmer when it is raining or when
excessively moist and humid conditions are present. Do not
cut damp grass or leave the tool outside overnight.
14. If the grass trimmer strikes a foreign object or becomes
entangled with it, stop the tool immediately. Unplug it,
check for damage, and have any damage repaired before
proceeding with operation. Do not operate the tool with a
broken hub or spool.
Specic Safety Warnings for
Garden Tiller
1. Always inspect the area where the tiller is to be used.
Remove all objects (e.g., stones, sticks, wires and foreign
objects) that could be thrown by the blades or cause the
operator to trip.
2. Thrown objects can cause serious injury to the eyes and
exposed body. Always wear safety glasses or eye shields
during operation and while performing an adjustment or
repair.
3. Always operate garden tiller wearing adequate garments.
Do not wear jewelry or other loose clothing, which could
become entangled in moving parts. Wear footwear that
provides sure footing.
4. Keep people, pets and property at least 25 feet from the
garden tiller while it is in operation. Stop the garden tiller if
people or pets enter the discharge area.
5. Never attempt to make any adjustments while the motor is
running.
6. Contact with the rotating parts can amputate hands and
feet. Do not put hands or feet near rotating parts.
7. Exercise extreme caution when operating on or crossing
gravel drives, walks, or roads. Stay alert for hidden
hazards or trac.
8. Always plan your culvitating pattern to avoid discharge of
material toward people, pets and property. Thrown objects
can cause serious personal injury.
9. Hold onto the garden tiller with both hands during
operation. Ensure the grips are dry.
10. After striking a foreign object, stop the motor, thoroughly
inspect the garden tiller for any damage, and repair the
damage before restarting and operating the garden tiller.
Disconnect the cord on electric motors.
11. Exercise caution to avoid slipping or falling.
12. Observe any noise-prevention regulations and laws.
13. If the garden tiller should start to vibrate abnormally, stop
the motor and check immediately for the cause. Vibration
is generally a warning sign of trouble.
14. Disengage all controls, stop the motor and wait until
the blades come to a complete stop when leaving the
operating position, before unclogging the blades and
when making any repair, adjustments and inspections.
15. Before cleaning, repairing, or inspecting, shut o the
motor and make certain all moving parts have stopped.
Disconnect the cord on electric motors.
16. Never operate the garden tiller without proper guard,
plates, or other safety protective devices in place.
17. Do not overload the garden tiller capacity by attempting to
cultivate too deep at too fast a rate.
18. Never operate the garden tiller at high transport speeds on
hard or slippery surfaces.
19. Be careful when cultivating in hard ground. The blades
may catch in the ground and propel the garden tiller
forward. If this occurs, let go of the handlebars and do not
restrain the garden tiller.
20. Use extreme caution when reversing or pulling the garden
tiller towards you.
21. Switch on the motor carefully according to instructions
and with feet well away from the blades.
22. Never pick up or carry the garden tiller while the motor is
running.
23. Inspect the garden tiller for worn, missing or damaged
parts and safety labels. See maintenance section for
detailed instructions.
24. Exercise caution when changing direction and operating
on slopes. Always keep feet and legs a safe distance away
from the machine. Look for hidden obstacles or hazards.
25. Do not grasp the exposed cutting blades or cutting edges
when picking up or holding the appliance.
26. Always turn the tiller OFF and disconnect the electrical
power when there is a work stoppage or changing work
areas. Never leave the machine running when unattended.
27. The blades will continue to rotate for a short period after
turning the tiller OFF. Wait until the blades have completely
stopped before lifting the machine or conducting
inspection and maintenance.
28. The motor housing remains hot for a short period after the
machine is turned OFF. Allow the motor housing to cool o
before touching or storing near combustible material.
29. Regularly check the following:
i) Accumulation of debris around the blades could cause
a poor performance or damage to the motor. Inspect
and clean before every use.
ii) Safety devices are operating properly. Do not tamper
with or adjust safety devices.
iii) Bolts and screws for proper tightness. Visually inspect
machine for any damage and that the tiller is in safe
working condition.
iv) Always replace damaged parts with original equipment
manufacturer’s (OEM) parts only. Replacement parts
that do not meet the original equipment specications
may lead to improper performance and compromise
safety.