Replacement Part List

Assembly

mWARNING! Do not insert battery until assembly is

complete. Failure to comply could result in accidental starting

and possible serious personal injury.

Fitting the Safety Guard

mWARNING! The guard must be properly installed. The

guard provides the operator and other bystanders with some

protection from thrown objects.

1. Align the safety guard with the grass trimmer + edger

head as shown (Fig. 31).

2. Firmly press the safety guard into place until it clicks into

the position (Fig. 32).

Connecting to the Telescoping Pole

1. Open the assembly lock on the telescoping pole, and

push the grass trimmer + edger head into the opening on

the end of the pole (Fig. 33).

2. When the lock tabs snap in, lock back the assembly lock,

and the grass trimmer + edger will be ready to use

(Fig. 34).

3. To remove the grass trimmer + edger head, release

the On/O switch and remove the battery. Unlock the

assembly lock, push the lock tabs on both sides, and pull

the grass trimmer + edger head out (Fig. 34).

Grass Trimmer + Edger

Fig. 31

Safety Guard

Grass trimmer

+ edger head

Fig. 32

Safety Guard

Grass trimmer

+ edger head

Telescoping pole

Fig. 33

Grass trimmer

+ edger head

Assembly lock

Fig. 34

Lock tab

Assembly lock