Replacement Part List

2. To use pole hedge trimmer for trimming the bottoms and

sides of hedges and shrubs, hold the pole trimmer at the

position shown below (Fig. 71).

3. To use pole hedge trimmer for trimming low-lying foliage

or ground cover, hold the pole hedge trimmer at the

position as shown below (Fig. 72).

mCAUTION! Do not use the pole hedge trimmer for

cutting stems greater than 0.6 inch (1.5 cm) thick.

Use the pole hedge trimmer only for cutting normal shrubbery

found around houses and buildings.

Do not force the pole hedge trimmer through dense growth.

A slight back and forth sawing action may ease the cutting of

larger, more dense growth. If the pole hedge trimmer begins to

slow down, reduce the rate of speed at which you are trying to

cut. If the pole hedge trimmer becomes jammed, immediately

turn the trimmer o. Remove the battery and clear the jammed

debris from the cutter blades.

Care + Maintenance

mWARNING! Blades are sharp. When handling the blade

assembly, wear non-slip, heavy-duty protective gloves. Do not

place your hand or ngers between blades or in any position

where they could get pinched or cut. NEVER touch the blades

or service the unit with the battery inserted.

Lubricate the Blades

For easier operation and longer blade life, lubricate the pole

hedge trimmer blade before and after each use.

1. Stop the motor and remove the battery.

2. Lay the pole hedge trimmer on a at surface. Apply

lightweight machine oil along the edge of the top blade

(Fig. 73).

If you will be using the pole hedge trimmer for an extended

period, it is advisable to stop work intermittently in order to

re-oil the blade.

NOTE: Do not oil while the pole hedge trimmer is running.

Fig. 70

Fig. 71

Fig. 72

Fig. 73