Use and Care Manual

10
Maintenance
1. Keep the ventilation vents of the tool clean at all times. If
possible, prevent foreign matter from entering the vents.
2. If the enclosure of the trimmer requires cleaning, do not
use solvents to clean it. Only use a moistened soft cloth.
Never let any liquid get inside the tool; and never immerse
any part of the tool into a liquid.
3. The blade rail should be cleaned and treated with light
machine oil or spray lubricant (such as WD-40) after
each use. When a job lasts for a long period of time, it
is recommended that the blade rail also be treated with
spray lubricant at regular intervals during operation.
Blade Cleaning
To ensure years of ecient and trouble-free operation, blade
cleaning should be performed if sap and debris have built-
up, or if you live in an area where the soil is sandy. Cleaning
unusually heavy deposits may require removal of the blades.
NOTE: Snow Joe
®
+ Sun Joe
®
will not be held responsible for
any damage or injuries caused by repair of the trimmer by an
unauthorized person or by mishandling of the trimmer.
Storage
When the tool will not be used for several months, it is ideal
to leave the battery connected to the charger. For optimal
storage, proceed as follows:
• Fully charge the battery.
• Store the tool in a secure and dry location. The storage
temperature must always remains in the range of
41 °F (5 °C) to 104 °F (40 °C).
• Before using the tool after prolonged storage, fully
recharge the battery.
Service and Support
If your Sun Joe
®
Hedger Joe
®
cordless grass shear + hedge
trimmer requires service or maintenance, please call the
Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
Model and Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal axed to the housing or handle
of your cordless grass shear + hedge trimmer. Copy these
numbers into the space provided below.
Record the following numbers from the housing or handle of your
new product:
Model #:
Serial #:
H J 6 0 4 C -