User Manual

ManualsBrandsSun Joe ManualsSun Joe WeatherproofingSnow Joe iON100V-21SB 100 Volt Cordless Electric Snow Blower

, LLC

SAVE THESE INSTRUCTIONS

A Division of Snow Joe

, LLC Model iON100V-21SB-CT Form No. SJ-iON100V-21SB-CT-880E-M

OPERATOR’S MANUAL

CORDLESS SNOW BLOWER – CORE TOOL

21-INCH | 100-VOLT MAX* | LED LIGHTS

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all instructions when using cordless snow blowers.

Basic safety precautions should always be followed to reduce

the risk of re, electric shock, and personal injury.

General Safety Rules

Notice the personal safety alert symbol m used in this

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

• Keep work area clean and well lit – Cluttered, dark areas

invite accidents.

• Keep bystanders away – All bystanders and pets should

be kept a safe distance away from the work area.

• Dress properly – Do not wear loose clothing or jewelry.

They can get caught in moving parts. Protective rubber

gloves and non-slip footwear are recommended when

working outdoors.

• Use the right product – Do not use this machine for any

job except that for which it is intended.

• mCAUTION! – Exercise caution to avoid slipping or falling.

Wear protective footwear that will protect your feet and

improve your footing on slippery surfaces.

• Use safety glasses – Also use safety footwear, snug-tting

clothing, protective gloves, hearing and head protection.

• Do not force the snow blower – Use the snow blower

at the rate for which it was designed to ensure optimal

performance and safe operation.

• Stay alert – Watch what you are doing. Use common

sense. Do not operate the snow blower when you are tired

or under the inuence of alcohol or drugs.

• Do not overreach – Keep proper footing and balance at

all times.

• Store indoors – When not in use, the snow blower should

be kept dry and stored out of the reach of children in a high

or locked place.

• Maintain snow blower with care – Follow instructions for

lubricating and changing accessories.

mWARNING! Always disengage the switch bar lever,

and disconnect the battery pack(s); wait for all movement to

stop before making any adjustments, inspecting, servicing,

changing accessories, cleaning the snow blower, or when

any other dangerous conditions present. Any such operation

should be performed after revolving parts inside the snow

blower stop completely. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

mWARNING! When replacing any parts, you must strictly

observe the instructions and procedures described in this user

manual. Special care should be paid to any rubber parts, since

these parts may increase the engine load and decrease its

mechanical power if damaged.

mWARNING! If you notice that the snow blower is not

running properly or hear abnormal sounds from the engine

when it is in use, immediately stop the machine, disconnect

the battery pack, and contact Snow Joe

+ Sun Joe

customer

service center at 1-866-SNOWJOE (1-866-766-9563).

• Surfaces – This snow blower is intended for use on

paved surfaces. Do not use on gravel, stone or other

unpaved surfaces unless the snow blower is adjusted for

such surfaces according to the instructions given in the

operator’s manual.

• Moving parts present risks – Keep your face, hair,

clothing, hands, and feet away from moving parts. All

guards and safety attachments must be installed properly

before using the unit. Shut o and disconnect the battery

pack(s) before touching any parts other than the handles

and switch.

• Avoid accidental starting – Make sure the safety button is

o and the switch bar lever is disengaged before inserting

the battery pack(s) into the unit. Do not transport the snow

blower with the safety button and the switch bar lever

engaged.

• Do not overreach – Maintain proper footing and balance at

all times. Place heels rmly on the ground and tightly grasp

the handle grips. Watch for uneven surfaces and do not

overreach. In case you fall or collide with the snow blower,

inspect the unit for any damages or cracks. When stepping

backwards, be careful to avoid obstacles beneath your feet

or behind you to avoid falling.

mWARNING! If the snow blower strikes any object,

follow these steps:

i) Stop the snow blower and remove the battery pack(s).

ii) Inspect for damage.

Summary of content (24 pages)

PAGE 1
R OPERATOR’S MANUAL A Division of Snow Joe®, LLC CORDLESS SNOW BLOWER – CORE TOOL 21-INCH | 100-VOLT MAX* | LED LIGHTS Model iON100V-21SB-CT mWARNING! Always disengage the switch bar lever, IMPORTANT! and disconnect the battery pack(s); wait for all movement to stop before making any adjustments, inspecting, servicing, changing accessories, cleaning the snow blower, or when any other dangerous conditions present.
PAGE 2
Battery + Charger Safety Instructions • Maintain charger cord – When unplugging the charger, pull the plug, not the cord, from the receptacle to reduce the risk of damage to the electrical plug and cord. Never carry the charger by its cord or yank it by the cord to disconnect it from the receptacle. Keep the cord away from heat, oil and sharp edges. Make sure the cord will not be stepped on, tripped over or subjected to damage or stress when the charger is in use.
PAGE 3
Information about the charger and the charging process a metal object makes a connection between the positive and negative contacts on the battery pack. Do not place a battery pack near anything that may cause a short circuit, such as paper clips, coins, keys, screws, nails and other metallic objects. A short-circuited battery pack poses a risk of fire and severe personal injury. 1. Please check the data marked on the rating plate of the battery charger (sold separately).
PAGE 4
Protection from environmental influences • Preliminary unit inspection – Thoroughly inspect the unit before use. Make sure all the parts are secure and installed correctly. If you notice any abnormalities, do not use the machine until it has been properly repaired. Always perform a test run the first time you use the snow blower or after replacing parts to ensure that the unit is functioning properly. 1. Wear suitable work clothes. Wear safety goggles. 2.
PAGE 5
model. When replacing any parts, you must strictly observe the instructions and procedures described in this manual. Special care should be paid to any rubber parts, since these parts may increase the engine load and decrease its mechanical power if damaged. • Tip over hazard – DO NOT operate near drop-offs, ditches, or embankments. Unit can suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.
PAGE 6
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand and follow all instructions in the user manual(s) before attempting to assemble and operate. WARNING! Do not expose the unit to rain or wet conditions. Keep dry.
PAGE 7
Know Your Cordless Snow Blower Read the owner’s manual and safety rules carefully before operating your cordless snow blower. Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. 1 SOLD SEPARATELY Battery + Charger options available at snowjoe.com 2 3 10 4 5 9 8 6 7 iON100V-2.5AMP 19 11 12 iON100V-5AMP 18 17 13 14 iON100V-RCH 1. Soft grip 2. Switch bar level 3.
PAGE 8
Technical Data NOTE: Do not discard the shipping carton and packaging material until you are ready to use the cordless snow blower. The packaging is made of recyclable materials. Properly dispose of these materials in accordance with local regulations or save the packaging for long-term product storage. Battery Voltage*............................ 100 V D.C. Battery Capacity........................... 2.5 Ah | 5.0 Ah Charging Time Max...................... 50 min (iON100V-2.5AMP) .........................
PAGE 9
Battery Pack Operation 3. Lock the handle frame in position by rotating the handle frame locks on both sides counter-clockwise (Fig. 3). This equipment is powered by either one or two lithium-ion batteries (sold separately). The battery pack(s) are completely closed and maintenance free. Fig. 3 Handle frame CORE TOOL BATTERY + CHARGER SOLD SEPARATELY. This snow blower can be powered by either one (1) or two (2) Snow Joe® 100-Volt lithium-ion batteries.
PAGE 10
Lights Light Indicators The battery is at 20% capacity and requires charging The battery is at 50% capacity and requires charging soon The battery is at 70% capacity LED light (iON100V-5AMP batteries only – sold separately) The iON100V-5AMP battery is equipped with a 0.35 watt LED light located on the handle, which is good for camping and emergency illumination. To turn on the LED light, open the carry handle, and press the battery push button twice in a row.
PAGE 11
When to Charge the iON100V LithiumiON Batteries Fig. 10 NOTE: The iON100V-2.5AMP and iON100V-5AMP lithium-ion battery packs do not develop a "memory" when charged after only a partial discharge. Therefore, it is not necessary to run down the battery pack before placing it into the charger. Red • Use the battery charge indicator lights to determine when to charge your iON100V-2.5AMP and iON100V-5AMP lithiumion battery packs.
PAGE 12
NOTE: If the green light is off while the red light flashes slowly, this indicates a temperature abnormality (i.e. that the battery pack is too hot). If the green light is off while the red light flashes rapidly, this indicates there's something wrong with the charger or the battery. Wait for a while and try to reinsert the battery into the charger. If the situation still persists, contact Snow Joe® + Sun Joe® customer service at 1-866-SNOWJOE (1-866-766-9563).
PAGE 13
MIN. Auger Speed MAX. Auger Speed Fig. 13 Battery compartment cover Battery Runtime 30 min 15 min Plowing Capacity 12.5 tons/charge 16 tons/charge 25 ft (7.6 m) 30 ft (9 m) Throw Distance NOTE: The specs in above table are based on the power provided by one Snow Joe® iON100V-5AMP battery (sold separately). Different battery combinations will affect the specs and your unit's performance. 1.
PAGE 14
2. The chute deflector on the top of the discharge chute controls the height of the snow stream. To adjust the height that the snow is thrown, squeeze the trigger on the chute-deflector handle, and then raise/lower the chute deflector. Release the trigger on the chute deflector handle to lock the chute deflector in place (Fig. 17). Fig. 17 Chute deflector trigger 2. To turn off, press the LED light button again. NOTE: After you have finished using your snow blower, remember to turn OFF the light switch.
PAGE 15
General Maintenance Tips Fig. 20 1. Do not attempt to repair the machine unless you have the proper tools and instructions for disassembly and repair of the machine. 2. Check bolts and screws at frequent intervals for proper tightness to ensure that the equipment is in safe working condition. 3. After each snow removal, shut off the motor, wait for all revolving parts to stop completely, remove the battery pack(s) and wipe residual ice and snow off the unit.
PAGE 16
2. Follow the same instruction to remove the other 3 blades located on the sides. Rotate the auger when working on the blades on the back. Fig. 21 3. After 4 blades on the side are removed, move to the two blade pieces that are fixed on the middle steel plate. Use the 10 mm wrench to hold the bolt steady, and use the 13 mm wrench to loosen and remove the nut. Repeat on the other nut and bolt set, and gently remove the blade from the central plate (Fig. 24). Fig.
PAGE 17
5. Install the new drive belt, rotating it onto the pulleys (Fig. 28). Fig. 25 Fig. 28 Right side panel New drive belt Old belt Bolts Nuts NOTE: The 2 bolts located on the left have 2 nuts on the back, while the other 4 bolts don't. Use one 10 mm wrench to hold the left two bolts steady and remove the nuts with the other 10 mm wrench first, and then remove all the bolts. NOTE: Rotate the new drive belt first around the engine pulley, then the idle pulley, and finally around the auger pulley.
PAGE 18
Service + Support If your Snow Joe® iON100V-21SB-CT cordless snow blower requires service or maintenance, please call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563). Model + Serial Numbers When contacting the company, reordering parts or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the decal located on the housing of the unit. Copy these numbers into the space provided below.
PAGE 19
Troubleshooting mWARNING! Always turn the tool OFF and remove the battery pack(s) before performing any adjustments, maintenance, or repairs to your cordless blower vac. Problem Possible Cause Solution 1. Batteries are flat. 1. Charge the batteries 2. Batteries are not locked in position. 2. Reinsert the battery, and try to start the machine again. 3. The safety button is not depressed 3. Depress the safety button, and pull the switch bar lever.
PAGE 20
Optional Accessories mWARNING! ALWAYS use only authorized Snow Joe ® + Sun Joe® replacement parts and accessories. NEVER use replacement parts or accessories that are not intended for use with this cordless snow blower. Contact Snow Joe® + Sun Joe® if you are unsure whether it is safe to use a particular replacement part or accessory with your cordless snow blower. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage. Accessories 1 Item 100 V 2.
PAGE 21
NOTES 21
PAGE 22
NOTES 22
PAGE 23
SNOW JOE® + SUN JOE® CUSTOMER PROMISE ABOVE ALL ELSE, Snow Joe® + Sun Joe® are dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us. That’s why we created the Snow Joe® + Sun Joe® promise. OUR PROMISE: Snow Joe® + Sun Joe® warrant new products for two years from the date of purchase.
PAGE 24
snowjoe.