Use and Care Manual

7
Unpacking
Carton Contents
• Cordless blower vac
• Blower tube
• Blower concentrator nozzle
• Front vacuum/mulcher tube
• Rear vacuum/mulcher tube
• Collection bag
• Wheel assembly
• 40 V 4.0 Ah EcoSharp
®
battery
• EcoSharp
®
battery charger
• Manual with registration card
1. Carefully remove the cordless blower vac and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the cordless blower vac.
The packaging is made of recyclable materials. Properly
dispose of these materials in accordance with local
regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils or small
parts. These items can be swallowed and pose a suocation
risk!
Assembly
mWARNING! To avoid serious personal injury, read and
understand all safety instructions provided.
mCAUTION! Do not install the battery before fully
assembling the unit.
mWARNING! To prevent serious personal injury, make
sure the switch is in the OFF (0) position, the battery is
removed and the impeller has come to a complete stop before
attaching or removing tubes.
For safety and transportation reasons, the lithium-ion battery
is packed separately from the machine and is partially
charged. Charge the battery before using the tool following the
instructions in the “Charging the battery” section.
Attaching the Blower Tube
1. Before using the blower function, securely fasten the inlet
cover over the air inlet until the lock button snaps into the
locked position (Fig. 1).
2. Slide the blower tube forward until the notched area on the
blower housing clicks into the slot on the blower tube
(Fig. 2).
3. Insert the concentrator nozzle onto the end of the blower
tube until it locks into position (Fig. 2).
NOTE: The concentrator nozzle is used to increase
air ow in tight areas (i.e around ower beds, under
decks, etc.).
4. To remove the blower tube, turn the ON/OFF power switch
to the OFF (0) position and remove the battery.
5. Press the tube release button and remove the blower tube
(Fig. 3).
Fig. 1
Inlet cover
lock button
Inlet
cover
Fig. 2
Blower tubeAir outlet
Concentrator
nozzle
Notched
area
Slot
Fig. 3
Blower tube
Tube release button
ON/OFF switch