Replacement Part List

5
Unpacking
Carton Contents:
• Reel mower body with front wheels
• Rear wheels (2)
• Rear wheel bolt + washer (2)
• Allen wrench
• Upper handle frame
• Middle handle frame
• Lower handle bar (2)
• Handle shield
• Handle shield knobs (4)
• Handle shield bolts (4)
• Manuals with registration card
1. Carefully remove the manual reel mower and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new manual reel
mower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suocation risk!
Assembly
Rear Wheel Assembly
1. Align one rear wheel with the hole on the end of the
mower body, and connect with one set of rear wheel
washer + bolt, as shown (Fig. 1).
2. Use the supplied Allen wrench to secure the bolt (Fig. 2).
3. Repeat the above instructions for the other wheel.
Handle Assembly
1. Lay out the handle parts upside down as shown for easier
assembly. Make sure the arch of the upper handle frame
is pointing down. Enter the end of the upper handle frame
into the middle handle frame, and enter the end of the
middle handle frame into the lower handle bar. Roughly
align the holes (Fig. 3).
Fig. 1
Rear wheel
Rear wheel
bolt + washer
Fig. 2
Rear wheel
Allen wrench
Upper handle frame
Lower
handle
bar
Fig. 3
Middle handle frame