Use and Care Manual

ManualsBrandsSun Joe ManualsKitchen20 in. 3-In-1 Electric Lawn Mower with Side Discharge Rear Bag and Mulch

Assembly

Parts List

• Mulch plug

• Grass catcher bag

• Manual

• Discharge Chute

Note:

• Carefully remove the parts from the box.

• Inspect the parts carefully in order to verify that no

breakage or damage occurred during shipping.

• Do not discard the packing material until all parts have

been examined.

Assembling the Handle (Fig. 2)

1. Remove any packing material which may be between

the upper and lower handles for sahipping purposes.

2. Pull up and back on the upper handle to raise the

handle into the operating position. Make sure the lower

handle is seated securely into the handle mounting

bracket.

3. Align the holes (C) between the upper handle (4) and

lower handles (5). Insert the bolts (B) and tighten them

with the wing nuts (C) provided. (Fig. 2)

4. Secure the lower handle to the bracket with the handle

knob on each side. (Fig. 2)

Installing the Grass Catcher Bag (Fig. 3)

1. UNPLUG THE POWER CORD, AND WAIT FOR BLADE

TO COME TO A COMPLETE STOP.

2. Lift the chute cover. (1)

3. While holding up the cover (1), place the grass catcher

bag hanger hooks (2) into the opening on the chute

cover (1) to allow the hanger hooks to attach to the rod

(3) which secures the chute cover.

NOTE: For optimal performance empty grass bag often

during use. A full grass bag will inhibit performance of the

mower and collection of grass clippings.

Install the Side Discharge Chute (Fig. 4)

This mower has 3 different functions-mulch, side discharge,

and rear bag. If you wish to discharge the clippings rather than

mulch, perform these steps.

1. UNPLUG THE POWER CORD, AND WAIT FOR BLADE

TO COME TO A COMPLETE STOP.

2. Lift the side discharge cover (1).

3. Align the grooves on the discharge chute (2) with the

pins on the underside of the discharge cover (1).

4. Lower the discharge chute until the hooks on the

mower deck are secured in the openings in the

discharge chute (2).

5. Release the side discharge cover (1).

Fig. 2

Fig. 3

Fig. 4