Replacement Part List

ManualsBrandsSun Joe ManualsHedge Trimmers3.6-Volt 2.0 Amp Electric Cordless Pruner in Red

, LLC

SAVE THESE INSTRUCTIONS

A Division of Snow Joe

, LLC

OPERATOR’S MANUAL

Model PJ3600C Form No. SJ-PJ3600C-880E-M

CORDLESS PRUNER

3.6 V | RECHARGEABLE

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

Notice the personal safety alert symbol m used in this manual

to draw your attention to a WARNING given along with the

particular operating instruction. This means that the operation

requires special ATTENTION, CAUTION, and AWARENESS.

When using this power tool, basic safety precautions, including

the following, should always be followed to reduce the risk of

re, electric shock, personal injury and material damage.

mWARNING! This unit can be dangerous! Careless or

improper use can cause serious injury.

mWARNING! The cutting blades can cut you. Keep hands

and feet away from the blades and the cutting area.

Retain this manual for future reference and reread it at the start

of each trimming season.

mWARNING! This battery-operated power tool must be

recharged only with the specic charging unit for the battery. A

charging unit that may be suitable for one type of battery may

create a risk of re when used with another battery type.

• Avoid accidental starting.

• When the tool is not in use, keep it away from other metal

objects.

• Before operating the tool, read the entire manual carefully

and make sure you know how to switch the tool OFF in an

emergency.

Work Area Safety

1. Keep work area clean and well lit. Cluttered and dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases or

dust. Power tools create sparks which may ignite the dust

or fumes.

3. Keep bystanders and children away. All bystanders,

including children and pets, should be kept a safe

distance away from the work area.

4. Avoid dangerous environment. Don't use the appliance

in wet or damp location.

Electrical Safety

1. If the battery charger cable is damaged, please call the

Snow Joe

+ Sun Joe

customer service center at

1-866-SNOWJOE (1-866-766-9563).

2. If charging the power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected power supply. The using of an RCD reduces the

risk of electric shock.

3. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any earthed (grounded)

power tools or battery chargers. Unmodied plugs and

matching outlets will reduce risk of electric shock.

4. Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is

earthed or grounded.

5. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

6. Do not abuse the charging cord. Never use the cord

for carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric

shock.

7. Battery charger is for indoor use only. Only charge this

battery-powered tool indoors.

Personal Safety

1. Stay alert. Watch what you are doing and use common

sense when operating a power tool. Do not use the

power tool while you are tired or under the inuence of

drugs, alcohol or medication. A moment of inattention

while operating power tool may result in serious personal

injury.

2. Use personal protective equipment. Always wear eye

protection. Protective equipment such as safety glasses,

a dusk mask, non-skid safety shoes, a hard hat, and

hearing protection, when used for appropriate conditions,

will reduce the possibility of personal injuries.

3. Avoid unintentional starting. Ensure the switch is in the

OFF position before connecting to the power source/

Summary of content (16 pages)

PAGE 1
R CORDLESS PRUNER 3.6 V | RECHARGEABLE OPERATOR’S MANUAL A Division of Snow Joe®, LLC Model PJ3600C Form No. SJ-PJ3600C-880E-M IMPORTANT! 3. Keep bystanders and children away. All bystanders, including children and pets, should be kept a safe distance away from the work area. Safety Instructions 4. Avoid dangerous environment. Don't use the appliance in wet or damp location. All Operators Must Read These Instructions Before Use Electrical Safety 1.
PAGE 2
10. Carry the product by the handle with the cutting blade stopped. When transporting or storing the product always fit the cutting device cover. Proper handling of the product will reduce possible personal injury from the cutter blades. battery charger, or before picking up or carrying the tool. Carrying power tools with your finger on the switch or charging power tools with the switch ON can lead to accidents. 4. Do not overreach. Keep proper footing and balance at all times.
PAGE 3
9. To reduce the risk of damaging the electric plug and cord, pull the plug, not the cord, when disconnecting the charger from the electric outlet. 10. Make sure the battery charging cable is located in a safe place so that it will not be stepped on, tripped over or otherwise subjected to damage or stress. 11. An extension cord should not be used unless absolutely necessary. Using an improper extension cord poses a risk of fire, electric shock or electrocution. 12.
PAGE 4
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on this tool before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand and follow all instructions in the user manual(s) before attempting to assemble and operate. SAFETY ALERT – Indicates a precaution, a warning or a danger.
PAGE 5
Know Your Cordless Pruner Read the owner’s manual and safety instructions carefully before operating cordless pruner. Compare the illustration below to the cordless pruner in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. 4 3 1 2 R 6 5 7 8 End of the handle 13 12 9 11 10 The other side 1. Blade cover 8. Blade lock bolt 2. Blade lock knob 9. Removable blade 3. Machine housing 10. Fixed blade 4. Handle 11.
PAGE 6
Unpacking 1. Rotate the blade lock knob clockwise to unlock (Fig. 1). Carton Contents Fig. 1 • Cordless pruner Blade lock knob • Blade cover • Charger • Manual with registration card 1. Carefully remove the cordless pruner and check to see that all of the above items are supplied. 2. Inspect the product carefully to make sure no breakage or damage occurred during shipping. If you find damaged or missing parts, DO NOT return the unit to the store.
PAGE 7
Before Using NOTE: The cordless pruner has been shipped in a low charge condition and should be fully charged before use. Charging Procedure 1. Plug the charger adapter into an appropriate AC power outlet. Connect the AC adapter charger plug into the charging socket of the cordless pruner to start charging (Fig. 4). The battery charger supplied matches the lithium-ion battery installed in the tool. Do not use other battery chargers. The lithium-ion battery is protected against deep discharging.
PAGE 8
mCAUTION! Wear protective gloves while working with Trimming Tips the pruner. Never touch the blade or blade rail while the tool is in operation and be aware of the sharp edges even when the pruner is not in use. The cordless pruner can be used to remove fresh blooms from the garden; also great for pruning overgrowth, dead and overlapping stems and twigs, as well as thin and weak growth. Follow the tips below for operation. Starting + Stopping 1.
PAGE 9
Storage 5. Cut branches one by one, as shown (Fig. 11). When the tool will not be used for several months, proceed as follows: Fig. 11 • Fully charge the battery. • Clean the product as describe above. 3 2 • Make sure that the blade lock knob is in the lock position, then assemble the blade cover over the blades (Fig. 12). 1 Maintenance Fig. 12 mWARNING! Always switch the product off and let the product cool down before performing inspection, maintenance and cleaning work. Blade cover 1.
PAGE 10
6. Do not dispose of batteries in fire. The cell of the battery may explode. 7. Batteries should be recycled or disposed of as per state and local guidelines. Service + Support If your Sun Joe® cordless pruner requires service or maintenance, please call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563). Model + Serial Numbers When contacting the company or reordering parts, you will need to provide the model and serial numbers of your product.
PAGE 11
Optional Accessories mWARNING! ALWAYS use only authorized Snow Joe + Sun Joe® replacement parts and accessories. NEVER use replacement parts or accessories that are not intended for use with this cordless pruner. Contact Snow Joe® + Sun Joe® if you are unsure whether it is safe to use a particular replacement part or accessory with your cordless pruner. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.
PAGE 12
NOTES 12
PAGE 13
NOTES 13
PAGE 14
NOTES 14
PAGE 15
SNOW JOE® + SUN JOE® CUSTOMER PROMISE ABOVE ALL ELSE, Snow Joe® + Sun Joe® are dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us. That’s why we created the Snow Joe® + Sun Joe® promise. OUR PROMISE: Snow Joe® + Sun Joe® warrant new products for two years from the date of purchase.
PAGE 16
snowjoe.com mWARNING! This product or its power cord contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information go to www.P65Warnings.ca.gov. mWARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known [to the State of California] to cause cancer, birth defects, or other reproductive harm.