Replacement Part List

10
Troubleshooting
Always disconnect the electric power supply before conducting maintenance or troubleshooting.
Problems Possible Solution
Grass trimmer + edger vibrates
Grass trimmer + edger
does not start
• Remove the SharperBlade
™
and clean the slots, carefully remove any grass and
weeds and so forth.
• If vibration persists after reassembly, replace the SharperBlade
™
with a new one.
• In the evert of the problem not disappearing, have the trimmer + edger checked
at an authorized service center.
• Check all the electrical connections; make sure the safety circuit-breaker has not
been activated.
• Check if a fuse has blown in your electrical system.
• Take the trimmer + edger to an authorized service center if the trimmer + edger
does not start after completing the checks.
• If the SharperBlade
™
no longer cuts or breaks, have this
replaced by contacting an authorized service center.
mCAUTION! The SharperBlade
™
can inict deep cuts.
Handle with care; use with caution.
• For repairs which have not been explained in these
instructions, contact an authorized service center at
1-866-SNOWJOE (1-866-766-9563)
Storage
Follow these recommendations for storing the grass trimmer +
edger.
• Clean the grass trimmer + edger thoroughly before storing.
• Store the trimmer + edger in a stable and safe location out
of the reach of children. Keep the trimmer + edger in a dry
place where the temperature is not too hot or too cold.
• Do not store the grass trimmer + edger resting against the
oor. Hang it by the upper handgrip so that the guard does
not touch anything. If the guard rests against a surface, its
shape and dimensions could be permanently altered, and
could render the machine unsafe to use.
Service + Support
If your Sun Joe
®
SB601E Electric Grass Trimmer + Edger
requires service or maintenance, please call the
Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
Model + Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
Record the following numbers from the housing or handle of your
new product:
S B 6 0 1 E
Model #:
Serial #: