Instructions / Assembly

Assembly + Operation

mWARNING! Before using this attachment, all operators must read the original

product manual accompanying their blower vac so that they fully understand how to use

the equipment properly. Follow ALL safety instructions as outlined in this manual. Failure

to follow these safety instructions can result in serious personal injury.

mCAUTION! All operators must wear close-tting clothing, safety goggles, and a dust

mask when using this attachment on their electric blower. Keep all bystanders and pets a

safe distance away from the work area. Beware of foreign objects that could be thrown by

the blower.

• DO NOT operate the blower with this attached gutter cleaner when fatigued.

• DO NOT overreach or stand on an unstable support. Keep proper footing and balance

at all times.

• Never direct airow towards bystanders. Always be aware of the direction in which the

debris will be thrown.

• Use a face lter mask to avoid breathing dust and debris.

1. Attach the gutter kit as shown in Fig. 1. Connect the A, B, and C components by

screwing them together. Then snap the A, B and C assembly into D, and then snap the

completed gutter atttachment into the electric blower.

NOTE: Use only enough gutter tube extensions to comfortably reach the inside of the

rain gutter you wish to clear.

2. The gutter tube nozzle (A) can be adjusted to any desired direction by rotating the

gutter tube connecter (D) as shown in Fig. 2. Gutter cleaning applications will vary. We

recommend you try various nozzle positions until you nd the one that works most

eectively with your home’s gutter design.

NOTE: If you have any questions, please call the Snow Joe

+ Sun Joe

customer

service department at 1-866-SNOWJOE (1-866-766-9563) for assistance.

Fig. 1

Electric

blower

A B B B B C D

Gutter tube nozzle

Gutter tube

connector

Fig. 2