Operating Guide
3
Assembly + Operation
mWARNING! Before using this attachment, all operators must read the original product
manual accompanying their blower vac so that they fully understand how to use the equipment
properly. Follow ALL safety instructions as outlined in this manual. Failure to follow these safety
instructions can result in serious personal injury.
mCAUTION! All operators must wear close-tting clothing, safety goggles, and a dust
mask when using this attachment on their electric blower. Keep all bystanders and pets a
safe distance away from the work area. Beware of foreign objects that could be thrown by the
blower.
• DO NOT operate the blower with this attached gutter cleaner when fatigued.
• DO NOT overreach or stand on an unstable support. Keep proper footing and balance at all
times.
• Never direct airow towards bystanders. Always be aware of the direction in which the
debris will be thrown.
• Use a face lter mask to avoid breathing dust and debris.
1. Attach the gutter kit as shown in Fig. 1. Connect the A, B, and C components by screwing
them together. Then snap the A, B and C assembly into D, and then snap the completed
gutter atttachment into the electric blower.
NOTE: Use only enough gutter tube extensions to comfortably reach the inside of the rain
gutter you wish to clear.
2. The gutter tube nozzle (A) can be adjusted to any desired direction by rotating the gutter
tube connecter (D) as shown in Fig. 2. Gutter cleaning applications will vary. We recommend
you try various nozzle positions until you nd the one that works most eectively with your
home’s gutter design.
NOTE: If you have any questions, please call the Snow Joe
®
+ Sun Joe
®
customer service
department at 1-866-SNOWJOE (1-866-766-9563) for assistance.
Fig. 1
Electric
blower
A B B B B C D
Gutter tube nozzle
Gutter tube
connector
Fig. 2