Use and Care Manual

Troubleshooting

WARNING! Always unplug the power cord before performing any adjustments, maintenance or repairs to your

electric blower vac.

Unit will not blow

or mulch

Unit will not start

1. Bag full

2. Blocked tube

3. Blocked impeller

4. Dirty bag

5. Torn bag

6. Bag unzipped

7. Unit unplugged

1. Unit is unplugged.

2. Power/speed switch is in the OFF (O) position.

3. Defective power switch.

4. Vac tubes are not correctly installed.

5. Intake gate/cover is not closed.

6. House circuit may have tripped.

1. Empty the bag.

2. Clear the blockage.

3. Clear the blockage.

4. Clean the bag.

5. Replace the bag.

6. Zip up the bag.

7. Plug into an outlet or an extension cord.

1. Check cord to make sure it is plugged into an electrical

outlet.

2. Slide the power switch to the ON (I) position and

select your desired speed setting with the speed

control switch.

3. Call the Snow Joe

+ Sun Joe

customer service center

at 1-866-SNOWJOE (1-866-766-9563).

4. Check vac tubes and ensure that they are correctly

installed to allow the switch to be engaged.

5. Ensure that gate/cover is fully closed and locked.

6. Check wall circuit breaker panel and reset if necessary.

Problem

Possible Cause

Solution