Replacement Part List

ManualsBrandsSun Joe ManualsEdgers12 Amp 2-in-1 Electric Wheeled Garden Lawn and Landscape Edger and Trencher

A Division of Snow Joe

, LLC Model SJEDGE7 Form No. SJ-SJEDGE7-880E-MR1

OPERATOR’S MANUAL

, LLC

SAVE THESE INSTRUCTIONS

ELECTRIC EDGER + TRENCHER

12-AMP | 2-TOOLS-IN-1

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety

mWARNING! When using the electric edger + trencher,

basic safety precautions should always be followed to reduce

the risk of re, electric shock, and personal injury. These

include:

Work Area Safety

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Keep children, bystanders, and pets away – All

spectators, including pets, should be kept a safe distance

away from the work area.

3. Do not operate the electric edger + trencher in

explosive atmospheres – Such as in the presence of

ammable liquids, gases, or dust. Power tools create

sparks which may ignite the dust or fumes.

4. Avoid dangerous environments – Do not use appliances

in damp or wet locations. Do not use in rain.

Personal Safety

1. Stay alert – Watch what you are doing. Use common

sense. Do not operate the edger + trencher when you are

tired, or under the inuence of alcohol or drugs.

2. Dress properly – Do not wear loose clothing or jewelry.

They can be caught in moving parts. Rubber gloves,

long pants and substantial, non-skid footwear are

recommended when working outdoors. Do not go

barefoot or wear sandals. Wear protective hair covering to

contain long hair.

3. Avoid unintentional starting – Do not carry plugged-in

tool with nger on the trigger. Make sure the switch is o

before plugging in the tool.

4. Do not overreach – Keep proper footing and balance at

all times.

5. Use personal protective equipment – Always wear eye

protection. Protective equipment such as dusk mask, non-

skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

Tool Use and Care

mWARNING! Don’t grasp the exposed cutting blades or

cutting edges when picking up or holding the appliance.

1. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

2. Keep children and bystanders away – Children and

other spectators, including pets, should be kept at least

50 feet (15 meters) away from the work area.

3. Use safety glasses and other safety equipment –

Use safety goggles or safety glasses with side shields,

complying with applicable safety standards and, when

needed, a face shield. Also use face or dust mask if

operation is dusty. This applies to all persons in the work

area. Also use a hard hat, hearing protection, gloves,

safety shoes and dust collection systems when specied

or required.

4. Use the right tools – Do not use tools for any job except

that for which they are intended.

5. Store idle tools indoors – When not in use, tools should

be stored indoors in a dry and high or locked-up place out

of the reach of children.

6. Do not abuse the cord – Never carry the tool by the cord

or yank the cord to disconnect it from the receptacle.

Keep cord away from heat, oil, and sharp edges.

7. Do not force the tool – It will do the job better and with

less likelihood of injury if it is used at the rate for which it

was designed.

8. Disconnect the tool – Disconnect the appliance from the

power supply when not in use, before servicing, and when

changing accessories such as blades and the like.

9. Maintain tools with care – Keep cutting edge clean for

best performance and to reduce the risk of injury. Follow

instructions for lubricating and changing accessories.

Inspect appliance cord periodically and if damaged, have

it repaired by authorized service facility. Inspect extension

cords periodically and replace if damaged. Keep handles

dry, clean, and free from oil and grease.

10. Check for damaged parts – Before further use of the

appliance, a guard or other part that is damaged should

be carefully checked to determine that it will operate

Summary of content (16 pages)

PAGE 1
R OPERATOR’S MANUAL A Division of Snow Joe®, LLC ELECTRIC EDGER + TRENCHER 12-AMP | 2-TOOLS-IN-1 Model SJEDGE7 Form No. SJ-SJEDGE7-880E-MR1 IMPORTANT! 5. Use personal protective equipment – Always wear eye protection. Protective equipment such as dusk mask, nonskid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
PAGE 2
still does not fit, obtain a correct polarized extension cord. A polarized extension cord will require the use of a polarized wall outlet. The extension cord plug will fit into the polarized wall outlet only one way. If the plug does not fit fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to install the proper wall outlet. Do not modify the appliance plug, extension cord receptacle, or extension cord plug in any way.
PAGE 3
Service 4. To prevent the appliance cord from disconnecting from the extension cord during operation, use the onboard extension cord restraint hook and/or make a knot with the two cords as shown in Table 1. 1. If your electric edger + trencher requires service, contact an authorized Snow Joe® + Sun Joe® dealer or call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563). Only identical replacement parts should be utilized for repairs.
PAGE 4
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, and follow all instructions in the user manual(s) before attempting to assemble and operate. Keep bystanders and children a safe distance away.
PAGE 5
Know Your Electric Edger + Trencher Read the owner’s manual and safety instructions carefully before operating the electric edger + trencher. Compare the illustration below to the electric edger + trencher in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. 1. Handle 2. Trigger switch 3. Extension cord restraint hook 4. Auxiliary handle knob 5 1 2 5. Auxiliary handle 6. Telescopic shaft 3 7. Appliance cord 8.
PAGE 6
m Unpacking CAUTION! NEVER use a sharp object to move jacketed wires out of the way. Carton Contents Telescoping shaft Fig. 2 • Edger + trencher motor housing with lower shaft bolt and nut Nut Bolt • Telescopic shaft adjustment knob and bolt • Auxiliary handle • Auxiliary handle knob + bolt • Wrench • Spanner • Manual with registration card Adjusting the Telescopic Shaft 1. Carefully remove the electric edger + trencher and check to see that all of the above items are supplied.
PAGE 7
Operation 3. Push in the front guide wheel arm, check to ensure the front guide wheel arm has located into any of the preallocated positions. Ensure the head of the bolt securing the front guide wheel arm is resting flat on the surface of the wheel arm (Fig. 7). Cutting Depth Adjustment The front guide wheel can be adjusted to allow a deeper or shallower cut, and to increase the life of the blade. The edger can be adjusted to edge at three different depths. 4.
PAGE 8
4. To switch OFF, release the ON/OFF trigger switch (Fig. 10). 3. Secure the loop onto the extension cord restraint hook then connect the extension cord to the appliance cord (Fig. 9). mCAUTION! Do not force the trigger switch without first pressing the safety lock button. Fig. 9 mCAUTION! Do not tie or jam the trigger switch in the ON position. The trigger switch is designed to be held in the ON position by your hand only.
PAGE 9
mWARNING! If you must edge under conditions that 4. There is no need to remove the inner flange, although on reassembly the area of the inner flange must be free of foreign particles (dirt, etc.). cause the blade chamber to become clogged, release trigger, and wait for blade to come to complete stop! Unplug the tool and remove clogged material with a stick. To continue to operate the tool in a clogged condition will seriously overload the motor. 5.
PAGE 10
Maintenance IMPORTANT: To assure product safety and reliability, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations. Use only identical replacement parts. Inspect and thoroughly clean your edger + trencher at the beginning of each edging season for longer life and better performance. mCAUTION! Do not hang edger + trencher on the switch trigger or power cord! NOTE: Do not store the tool on or adjacent to fertilizers or chemicals.
PAGE 11
Optional Accessories mWARNING! ALWAYS use only authorized Snow Joe + Sun Joe® replacement parts and accessories. NEVER use replacement parts or accessories that are not intended for use with this tool. Contact Snow Joe® + Sun Joe® if you are unsure whether it is safe to use a particular replacement part or accessory with your tool. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.
PAGE 12
NOTES 12
PAGE 13
NOTES 13
PAGE 14
NOTES 14
PAGE 15
SNOW JOE® + SUN JOE® CUSTOMER PROMISE ABOVE ALL ELSE, Snow Joe® + Sun Joe® are dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us. That’s why we created the Snow Joe® + Sun Joe® promise. OUR PROMISE: Snow Joe® + Sun Joe® warrant new products for two years from the date of purchase.
PAGE 16
snowjoe.