This unit has been reconditioned by Home and Power Company Do not return to the manufacturer Please contact us via email at info@homeandpower.com We will very happy to assist you Home and Power Customer care.
ELECTRIC PRESSURE WASHER 2030 PSI | 1.76 GPM | 14.5 AMP Model SPX3000 Form No. SJ-SPX3000-880E-MR2 OPERATOR’S MANUAL A Division of Snow Joe®, LLC IMPORTANT! • Stay alert – Watch what you are doing. Use common sense. Do not operate the pressure washer when you are tired, or under the influence of alcohol or drugs. Safety Instructions • Do not overreach – Keep proper footing and balance at all times.
m • Disconnect the tool – Disconnect from the electrical power supply before performing any maintenance task. WARNING! Electrical Shock Hazard – Before starting up your machine, please check it carefully for any defects. If you find any, do not start up your machine and contact your distributor. • Keep children away – This high-pressure electric power washer must not be used by children or untrained personnel.
Risk of electrocution plug still does not fit, contact a qualified electrician to install the proper wall outlet. Do not modify the appliance plug, power cord receptacle, or power cord plug in any way. m • Inspect cord before using. • Do not use if cord is damaged. • Keep all connections dry and off the ground. m WARNING • Do not touch plug with wet hands. • Keep cord away from heat and sharp edges. • Do not spray electrical apparatus and wiring. Electric shock may cause SEVERE INJURY or DEATH.
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, and follow all instructions in the user manual(s) before attempting to assemble and operate. WARNING! Electrical shock hazard. SAFETY ALERT – Indicates a precaution, a warning, or a danger.
Know Your Electric Pressure Washer Read the owner’s manual and safety instructions carefully before operating the electric pressure washer. Compare the illustration below to the electric pressure washer in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. 1. Safety lock (Locate lock in center of trigger. Pull up and snap in place. See Fig. 20, pg. 10) 2. Trigger 3. Transport handle 4. High-pressure hose connection 5.
Unpacking Assembly 1. Position the washer as CLOSE as possible to the water supply. Carton Contents • Electric pressure washer 2. The washer must be used on a secure and stable surface in a standing, upright position (Fig. 1). • Handle • Trigger gun Fig.
6. Connect the PVC detergent tube to the detergent connection (Fig. 7). 5. Insert the detergent bottles (top end first) under the ridge of their designated storage compartment (Figs. 4 & 5). Then snap the bottom of the bottles into the V-shaped grooves to secure them in place (Fig. 6). Fig. 7 Fig. 4 Detergent tank Detergent tube Detergent connection 7.
8. To assemble the hose holder, slide the holder into position (Figs. 10 & 11) and secure it to the unit with the remaining small screw (Fig. 12). 9. Fit the spray wand into the trigger gun and rotate it until the two parts are completely locked (Fig. 13). Fig. 13 Fig. 10 Trigger gun Spray wand 10. Connect the high-pressure hose to the trigger gun (Fig. 14). Fig. 11 Fig. 14 Trigger gun High-pressure hose Fig. 12 11. Connect the high-pressure hose to the water outlet on the washer (Fig. 15).
mWARNING! Keep hose away from sharp objects. OFF Fig. 18 Bursting hoses may cause injury. Examine hoses regularly and replace if damaged. Do not attempt to mend a damaged hose. OFF ON 0 ON 12. Connect the garden hose adaptor (female coupler) to the water inlet of the pressure washer, then thread your garden hose (male end) into the garden hose adaptor (Fig. 16). The garden hose must have an internal diameter of at least 13 mm (1/2 in.) and must be reinforced.
2. Engage the safety lock on the trigger handle by pushing up on the safety lock until it clicks into the slot (Fig. 22). Fig. 20 Slot Fig. 22 Slot Safety lock Trigger Safety lock 3. Turn the switch to the ON (I) position to start the pressure washer (Fig. 21). Fig. 21 0 OFF 3. Snap the desired nozzle onto the Quick-Connect collar until it clicks into place (Fig. 23). ON Fig.
mWARNING! Use only detergents specifically designed Fig. 25 for use with pressure washers. DO NOT USE household detergents, acids, alkaline solutions, bleaches, solvents, flammable material, or industrial grade solutions. These could damage the pressure washer. Many detergents may require mixing prior to use. Prepare the cleaning solution as instructed on the solution bottle. Detergent selection dial 1. Remove the cap(s) and detergent suction tube(s) from the detergent bottle(s). 2.
mIMPORTANT! NEVER USE: 5. Select the right nozzle for the job (Fig. 26): • Bleach, chlorine products, and other corrosive chemicals Fig. 26 • Liquids containing solvents (e.g. paint thinners, gasoline, oils) • Tri-sodium phosphate products • Ammonia products • Acid-based products These chemicals will harm the unit and will damage the cleaning surface. 0º 15º Shutting down 25º 40º 1. Turn the switch to the OFF (0) position and unplug the power cord from the outlet. SOA P 2.
Winterizing and long-term storage Fig. 28 If you must store your pressure washer in a location where the temperature falls below 32ºF (0ºC), you can minimize the chance of damage to your machine by utilizing the following procedure: • Disconnect all water connections. Inlet filter • Turn on the machine for a few seconds until the remaining water in the pump exits. Turn off immediately. • Do not allow the high-pressure hose to become kinked.
Disposal Recycling the washer • Do not dispose of electrical appliances as unsorted municipal waste. Use separate collection facilities. • Contact your local government agency for information regarding the collection systems available. • If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
Troubleshooting • Disconnect the unit from the electrical power supply before carrying out maintenance on the machine or when checking that its parts are in proper working order. • To avoid unnecessary hassles, consult the following table before contacting customer service with any mechanical issues. Problems Machine refuses to start Possible Cause Possible Solution • Power failure/machine not plugged into a working receptacle. • Check to make sure machine is plugged into a working outlet.
Accessories mWARNING! ALWAYS use only authorized Snow Joe + Sun Joe® replacement parts and accessories. NEVER use replacement parts or accessories that are not intended for use with this electric pressure washer. Contact Snow Joe® + Sun Joe® if you are unsure whether it is safe to use a particular replacement part or accessory with your pressure washer. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.
NOTES 17
NOTES 18
HOME AND POWER RECONDITIONED PRODUCT LIMITED WARRANTY ABOVE ALL ELSE, Home and Power is dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it's important that you know what you can expect from us. That's why we created the Home and Power promise. OUR PROMISE: Home and Power warrants re-conditioned product for 90-days from the date of purchase.