User Manual

8
8. To assemble the hose holder, slide the holder into position
(Figs. 10 & 11) and secure it to the unit with the remaining
small screw (Fig. 12).
9. Fit the spray wand into the trigger gun and rotate it until
the two parts are completely locked (Fig. 13).
10. Connect the high-pressure hose to the trigger gun
(Fig. 14).
11. Connect the high-pressure hose to the water outlet on the
washer (Fig. 15).
Fig. 10
Fig. 11
OFF
ON
O
Fig. 12
Small screw
Fig. 13
Trigger gun
Spray wand
High-pressure hose
Trigger gun
Fig. 14
Fig. 15
High-pressure water outlet
(REAR)
High-pressure hose