User Manual

8
5. Connect the other end of high-pressure hose to the water
outlet on the washer (Fig. 5).
mWARNING! Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
6. Connect the garden hose adapter (female coupler) to
the water inlet of the pressure washer, then thread your
garden hose (male end) into the garden hose adapter
(Fig. 6). The garden hose must have an internal diameter
of at least 13 mm (1/2 in.) and must be reinforced. The
water supply must be at least equal to the washer delivery
capacity.
NOTE: The machine is not suitable for connection to the
potable water main.
7. Attach garden hose to water supply (Fig. 7).
mWARNING! Do not connect to potable water system.
mWARNING! If connection is made to a potable water
system, the system shall be protected against backow.
mWARNING! The intake water temperature must not
exceed 104ºF/40ºC. The water supply must not exceed
0.7 MPa.
mCAUTION! The washer must only be used with clean
water; use of unltered water containing corrosive chemicals
will damage the washer.
High-pressure hose
Trigger gun
Fig. 4
Fig. 5
High-pressure
water outlet
High-pressure
hose
Fig. 6
Garden hose
This end to
water inlet
Garden hose
(male end)
Fig. 7
Connect to water supply
Garden hose