Replacement Part List
Unpacking
Carton Contents
• Electric pressure washer
• Handle with high-pressure hose holder
• Nozzle storage board
• Spray wand protector
• Trigger gun holder
• 4.8 x 20 screws (2)
• 4.8 x 16 screws (5)
• Spray wand
• Trigger gun
• Needle clean-out tool (included with manual packet)
• Five (5) Quick-Connect nozzles (0º, 15º, 25º, 40º and Soap)
• High-pressure hose
• Garden hose adapter (female coupler)
• Manuals with registration card
1. Carefully remove the pressure washer and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric
pressure washer. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suocation
risk!
mWARNING! Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Assembly
Tools required: Phillips head screwdriver
1. Slide the handle with high-pressure hose assembly in
position on the top of the pressure washer, xed with two
4.8 x 20 screws and two 4.8 x 16 screws as shown
(Fig. 1).
2. Put on the nozzle storage board in position and secure
with two 4.8 x 16 screws (Fig. 2).
3. Slide the trigger gun holder in position (Fig. 3).
Fig. 1
Handle assembly
Fix with 4.8
x 20 screws
Fix with 4.8 x 16
screws
Fig. 2
Nozzle
storage board
Fix with 4.8
x 16 screws
7