Use and Care Manual

4. Align the water inlet on the base unit with the outlet on

the bottom of the bucket, and seat the bucket on the

base unit. Check alignment to ensure a proper seal and

connection (Fig. 4).

5. Flip up the buckles on the base unit and latch to bucket.

Press down on the buckle ends to lock the bucket to the

base unit (Fig. 5).

mWARNING! When the water bucket is xed on the base

unit, do not lift the pressure washer by the handle. Instead, use

the tow handle to pull the pressure washer unit along on its

wheels (Fig. 6).

6. Take the spray wand and align the two tabs with your

trigger gun. Once aligned, push the spray wand rmly into

the trigger gun, twist counter-clockwise to lock into place

(Fig. 7).

Fig. 3

Trigger

gun holder

Fig. 4

Base unit

Bucket

Bucket outlet

Water inlet

Fig. 5

Bucket buckle

2. Press the end

1. Flip up

Fig. 6

Fig. 7

Spray wand

Trigger gun