Replacement Part List

5. Check the oil level with the oil measuring plug. Make sure

the oil level is above the MIN on plug (Fig. 23).

NOTE: If the oil is less than MIN, please add the oil and

check the oil level through the oil level window on the

side of the pump, until the oil reaches the red dot on the

window (Fig. 24).

Clean the Adapter Filter and the Nozzle

1. To ensure good performance, check and clean the adapter

lter (Fig. 25). Remove the lter and rinse with warm water

to prevent any foreign matter from clogging the pump

(Fig. 26).

2. Clean the nozzle with the needle clean-out tool provided

(Fig. 27). Remove the spray wand from the gun; remove

any dirt from the nozzle hole and rinse.

Disposal

Recycling the Pressure Washer

• Do not dispose of electrical appliances as unsorted

municipal waste. Use separate collection facilities.

• Contact your local government agency for information

regarding the collection systems available.

• If electrical appliances are disposed of in landlls

or dumps, hazardous substances can leak into the

groundwater and get into the food chain, damaging your

health and well-being.

MIN. oil level

Fig. 23

Oil measuring

plug

Oil inlet

Fig. 24

Oil level window

Do not pass the

red dot

Fig. 25

Adapterlter

Garden hose

adapter

Fig. 26

Filter

15º

Fig. 27

Needle clean-out tool