Use And Care Manual

6
Safety Symbols
The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all
instructions on the machine before attempting to assemble and operate.
READ THE OPERATOR'S
MANUAL(S) – Read, understand
and follow all instructions in the
user manual(s) before attempting
to assemble and operate.
SAFETY ALERT – Indicates a
precaution, a warning or a danger.
The rotating part will continuously
run for several seconds after you
turn o the machine.
Double Insulation.
WARNING! Do not expose the unit
to rain or wet conditions.
CAUTION! Avoid contacting the
guide bar tip with any object. Tip
contact may cause the guide bar
to move suddenly upward and
backwards, which may cause
serious injury to the user.
WEAR EYE AND HEARING
PROTECTION – For protection
against injury, wear ear defenders
and safety goggles.
Keep bystanders and children a safe
distance away.
WARNING! Two hands are always
to be used when operating the chain
saw.
Symbols SymbolsDescriptions Descriptions
m
DANGER! ROTATING BLADES
– Keep hands and feet away from
openings while the saw is running.
Wear protective gloves and
non-slip footwear when using
the machine and handling
debris.
Correct direction of cutting teeth.
SWITCH OFF! Remove plug from
outlet immediately if the cord is
damaged or cut.
SWITCH OFF! Remove plug from
outlet before cleaning or conducting
maintenance checks.