Replacement Part List

11
2. Adjust the auxiliary handle to a comfortable working
position (Fig. 8).
3. Turn the handle knob back to lock the auxiliary handle in
position.
Starting + Stopping
mWARNING! Rotating blade may cause serious injury.
The blade will continue to turn for a few seconds after the
tool has been switched OFF. Do not touch the rotating blade.
Contact with hot components (i.e. motor housing, gear box,
etc.) on the machine may cause burns. Allow the machine to
cool before handling.
1. Slide the battery in the battery compartment until it clicks
and locked into position (Fig. 9).
2. To turn the tool ON, press and hold the safety lock button
while squeeze the ON/OFF switch. Once the tool is
running, release the safety lock button (Fig. 10).
3. To switch OFF, release the ON/OFF trigger (Fig. 10).
Operating Tips
• Before each use, check the product, the battery, and any
other accessories for damage. Do not use the product if it is
damaged or shows wear.
• Double check that the accessories and attachments are
properly tted.
• Always hold the product by its handles. Keep the handles
dry to ensure a secure grip.
• Ensure that the air vents are always unobstructed and clear.
Clean them if necessary with a soft brush. Blocked air vents
may lead to overheating and damage the product.
• Switch the product o immediately if you are disturbed
while working by other people entering the working area.
Always let the product come to a complete stop before
averting your attention.
• Do not overwork yourself. Take regular breaks to ensure you
can concentrate on the task at hand and have full control
over the product.
Fig. 7
Handle knob
Auxiliary handle
Fig. 8
Auxiliary handle
Fig. 9
Battery
compartment
Battery
Fig. 10
Safety lock button
ON/OFF switch