Use and Care Manual

Adjusting the telescopic shaft

1. Loosen the telescopic shaft adjustment knob.

2. Pull and adjust the shaft to a comfortable height (Fig. 5).

3. Make sure to tighten the knob once the desired length is

suitable (Fig. 5).

Adjusting the angle of cutting head

mWARNING! Always unplug the trimmer before making

any adjustments to the trimmer.

1. Slide the locking lever down and hold (Fig. 6).

2. Twist the operation handle to the desired position.

3. Release locking lever.

mWARNING! Never use steel, wire, rope, string, or other

materials as cutting line. Other materials can break off during

cutting and become a dangerous missile that can cause

serious injury.

Application

Replacing the spool

1. Disconnect the main plug.

2. Press together both locking devices at the spool cover and

remove the cover (Fig. 8).

3. Remove the spool from the spool cover (Fig. 9).

4. Remove the spring and clean dirt and grass residues.

Screws

Fig. 4

Telescopic Shaft

Adjustment Knob

to tighten

the knob

Lower Shaft

Adjustment Knob

Fig. 5

90°

180°

Fig. 6

Locking

Lever

Locking

Devices

Spool

Cover

Spool

Fig. 7

Fig. 8