Replacement Part List
7
Cutting Head Angle Adjustment
The telescoping pole is equipped with an adjustable head
which can be rotated 180º (Fig. 4). Follow the instructions
below to adjust the angle.
1. Loosen the cutting head by turning the angle adjustment
knob clockwise (Fig. 4).
2. Rotate the cutting head 180º then tighten the angle
adjustment knob counter-clockwise (Fig. 4).
Securing the Extension Cord
1. Make a loop with the extension cord.
2. Insert the loop through the opening in the back of the
rear handle and secure the loop onto the extension cord
restraint hook (Fig. 5).
3. Connect the extension cord to the appliance cord (Fig. 5).
Operation
Starting + Stopping
Before you start the unit, make sure the grass shear + weeder
is not contacting any object.
1. Remove the grass shear blade sheath (Fig. 6).
2. To turn the grass shear + weeder ON, press and hold the
safety lock button with your thumb, then squeeze the ON/
OFF trigger switch with your ngers. Once the machine
powers on, you can release the safety button and proceed
with operation (Fig. 7).
3. To switch OFF, release the ON/OFF trigger switch (Fig. 7).
Fig. 4
Cutting head
Angle adjustment
knob
Fig. 5
Extension cord
restraint hook
Extension cord
Appliance
cord
Fig. 6
Grass shear
bladeGrass shear
blade sheath
Fig. 7
Safety lock
button
Trigger
switch