Replacement Part List

9
Fitting and Changing the Blades
1. To t or change the blade, place the grass shear + weeder
on a hard surface. Turn the unit upside down.
2. Unscrew the blade cover and gently remove the shear
blade by lifting the end tip of the blade o of the grass
shear + weeder unit (Fig. 11).
3. Insert the new blade into the base of the motor housing
and secure the blade cover with 4 screws (Fig.12).
NOTE: If you have any questions, please call the Snow Joe
®
+ Sun Joe
®
customer service department at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
Blade Maintenance
To ensure years of ecient and trouble-free operation, blade
cleaning should be performed if sap and debris have built-
up, or if you live in an area where the soil is sandy. Cleaning
unusually heavy deposits may require removal of the blades.
NOTE: Snow Joe
®
+ Sun Joe
®
will not be held responsible
for any damage or injuries caused by repair of the tool by an
unauthorized person or by mishandling of the trimmer.
1. Keep the cutting blades clean and free of debris. Remove
trimmings.
2. Apply a small amount of suitable lubricant on the blades
to retain a good cutting performance (Fig. 13).
3. Keep the blades sharp. Have a worn or damaged cutting
device replaced with a new one of the same type by a
qualied specialist. Spare parts may be ordered online at
snowjoe.com or via phone by contacting the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
Storage
For optimal storage, proceed as follows:
• Clean the product as described above.
• Put the blade sheath over the blade (Fig. 14).
Service and Support
If your Sun Joe
®
electric grass shear + weeder requires
service or maintenance, please call the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE (1-866-766-9563).
Fig. 11
4 screws
Shear blade
Blade cover
Fig.12
Shear blade
Blade cover
Fig.13
Fig. 14
Grass shear
bladeGrass shear
blade sheath