Computer Accessories User Manual

Chapter 5 Using Windows XP Professional 39
▼ How to Perform a Custom Installation
Caution – When you specify an operating system to auto-install in the Create a
New Emulated Drive dialog box, the software automatically finds and copies setup
files, boot files, system files, and drivers that are appropriate for that operating
system. The software also launches Windows Setup when SunPCi software reboots.
Do not perform a custom installation unless you want to use customized installation
scripts.
1. Create a new emulated hard drive and auto-install the DR DOS 7.01 operating
system software.
See “Emulated Drives and SunPCi III Software” on page 12. Set options in the Create
a New Emulated Drive dialog box as follows:
■ Select DR DOS 7.01 (Bootable) as the operating system to auto-install.
■ Be sure to make the drive at least 2 Gbytes in size, which can be expanded later if
needed.
■ Attach the drive as a C: drive.
■ For best performance, create your emulated drives on a local hard disk on your
Sun system or server.
The SunPCi III software reboots. The OpenDOS prompt (C:\>) opens.
2. Install the SunPCi III drivers.
The default location for the Windows XP Professional files is r:\cdrom\cdrom0\
i386. However, if your Windows XP Professional files reside at a location other than
the default one, you need to use the /s: switch to specify where the files are located.
For example, if your Windows XP Professional disk image is located in your Solaris
directory at /export/home/winxp, you would access it from the R: drive in
OpenDOS.
Note – Copy all the contents of the installation CD files to the winxp folder before
starting the installation.
Type the following command all on one line:
The setup process takes a few minutes to complete.
C:\> f:\drivers\winxp\setupwxp /s:r:\export\home\winxp\i386