User Guide

Chapter 4 Replacing Cold-Swappable Components 4-17
FIGURE 4-10 Removing the System Configuration PROM (NVRAM)
4.4.2 Replacing the Service Processor
1. Remove the replacement service processor from the package and place it on an
antistatic mat.
2. Install the system configuration PROM (NVRAM) that you removed from the
faulty service processor.
The PROM is keyed to ensure proper orientation.
3. Insert the service processor edge into the bracket and carefully align the
service processor so that each of its contacts is centered on a socket pin.
4. Push firmly and evenly between the handle edges, until the service processor
is firmly seated in the connector socket.