User Guide

Chapter 4 Replacing Cold-Swappable Components 4-3
on the chassis. Do this after you disconnect the power cords from the server module.
Following this practice equalizes the electrical potentials between you and the server
module.
4.1.2.2 Using an Antistatic Mat
Place ESD-sensitive components such as the motherboard, memory, and other PCB
cards on an antistatic mat.
4.2 Common Procedures for Parts
Replacement
Before you can remove and replace internal components, you must perform the
procedures in this section.
4.2.1 Required Tools
You can service the Sun Blade T6320 server module with the following tools:
■ Antistatic wrist strap
■ Antistatic mat
4.2.2 Shutting Down the System
Performing a graceful shutdown ensures that all of your data is saved and that the
system is ready for restart. This section describes procedures for using the ILOM CLI
and the ILOM web interface to shut down the system.