User Guide

4-6 Sun Blade T6320 Server Module Service Manual • June 2009
2. At the ILOM -> prompt, type the set /SYS/PS0
prepare_to_remove_action=true command and type y to confirm.
ILOM CLI, ILOM web interface, and ALOM-CMT command equivalents are
shown in
TABLE 4-1.
The blue blade ok2 remove LED is illuminated.
The top white LED is the Locator LED. You can also set the white locator LED to
blink:
Once you have located the server module, you can press the Locator LED to turn
it off.
3. If a cable is connected to the front of the server module, disconnect it.
-> set /SYS/ prepare_to_remove_action=true
Are you sure you want to stop /SYS (y/n)? y
Stopping /SYS
-> set /SYS/LOCATE value=fast_blink