Switch User Manual

vi Sun Netra CP3240 Switch Installation Guide • September 2009
1.8.1.1 Removing a Switch From the Front of the Server 1–11
1.8.1.2 Removing a Rear Transition Module for a Switch 1–13
1.8.2 Installing a Switch Set 1–14
1.8.2.1 Installing the Rear Transition Module for a Switch 1–14
1.8.2.2 Installing a Switch 1–14
1.9 Switch LEDs 1–15
1.9.1 ATCA Board Status LEDs 1–15
1.9.2 Hot-Swap LED 1–16
2. Overview 2–1
2.1 Features 2–2
2.1.1 General 2–2
2.1.2 Base Interface 2–3
2.1.3 Fabric Gigabit Interface 2–4
2.1.4 AMC Sites 2–5
2.2 Switch Components 2–6
2.2.1 Broadcom StrataXGS 3 BCM56503 Ethernet Switch 2–6
2.2.2 Broadcom StrataXGS 3 BCM56800 Ethernet Switch 2–6
2.2.3 Broadcom BCM5464R and BCM5461S 10/100/1000Base-T Ethernet
PHY 2–6
2.2.4 Freescale PowerQUICC II MPC8247 Communications Processor
2–7
2.2.5 Pigeon Point BMR-H8S-AMCc AdvancedTCA IPMI Subsystem
2–7
2.3 Protocols, RFCs, and MIBs Support 2–8
2.3.1 FASTPATH Switching 2–8
2.3.1.1 Additional Layer 2 Functionality 2–9
2.3.1.2 System Facilities 2–9
2.3.1.3 Switching MIBs 2–10
2.3.1.4 Routing MIBs 2–10