Server User Manual
Table Of Contents
- Sun Netra™ CP3250 Blade Server User’s Guide
- Contents
- Figures
- Tables
- Preface
- Overview
- Hardware Installation and Service
- 2.1 Safety and Tool Requirements
- 2.2 Installing the Blade Server
- 2.3 Service Procedures
- 2.3.1 Hot-Swapping the Netra CP3250 Blade Server
- 2.3.2 Powering Off the Netra CP3250 Blade Server
- 2.3.3 Removing the Netra CP3250 Blade Server
- 2.3.4 Powering On the System
- 2.3.5 Automatic Power-Off Events
- 2.3.6 Servicing DIMMs
- 2.3.7 Installing the Optional Compact Flash Card
- 2.3.8 Installing Optional AMC
- 2.3.9 Adding or Replacing the Battery
- 2.3.10 Changing Jumper Settings
- 2.3.11 Checking DIP Switch Settings
- 2.3.12 Resetting the Netra CP3250 Blade Server
- Hardware Architecture
- Software Configuration
- Configuring and Using BIOS Firmware
- 5.1 About BIOS Settings
- 5.2 Changing the Configuration of a BIOS Menu Item
- 5.3 Setting the Boot Device Using BIOS Setup Screens
- 5.4 Setting Supervisor and User Passwords
- 5.5 Resetting the System Time and System Date
- 5.6 Updating the BIOS
- 5.7 Secondary BIOS Image
- 5.8 Perform a Live Firmware Upgrade
- 5.9 Power-On Self-Test
- 5.10 Changing POST Options
- BIOS Screens
- Physical Characteristics
- ShMM CLI and Commands
- Index

x Sun Netra CP3250 Blade Server User’s Guide • April 2009
FIGURE 2-16 Netra CP3250 Blade Server Front Panel 2–35
FIGURE A-1 BIOS Main Menu A–2
FIGURE A-2 Advanced Configuration Menu A–3
FIGURE A-3 CPU Configuration Menu A–4
FIGURE A-4 IDE Configuration Menu A–5
FIGURE A-5 USB Configuration Menu A–6
FIGURE A-6 Event Log Control Menu A–7
FIGURE A-7 IPMI 2.0 Configuration Menu A–8
FIGURE A-8 Remote Access Configuration Menu A–9
FIGURE A-9 PCI Option ROM Configuration Menu A–10
FIGURE A-10 Trusted Computing Menu A–11
FIGURE A-11 Boot Settings Menu A–12
FIGURE A-12 Boot Device Priority Configuration Menu A–13
FIGURE A-13 Security Settings Menu A–14
FIGURE A-14 Exit Menu A–15
FIGURE B-1 Ethernet RJ-45 Connector B–3
FIGURE B-2 Front Panel USB Connector B–4
FIGURE B-3 Front Panel Serial RJ-45 Connector B–5
FIGURE B-4 Power Distribution Connector (Zone 1) P10 B–6
FIGURE B-5 Zone 2 Connector B–8
FIGURE B-6 Zone 3 Connector B–10










