Server User Manual
Table Of Contents
- Sun Netra™ CP3250 Blade Server User’s Guide
- Contents
- Figures
- Tables
- Preface
- Overview
- Hardware Installation and Service
- 2.1 Safety and Tool Requirements
- 2.2 Installing the Blade Server
- 2.3 Service Procedures
- 2.3.1 Hot-Swapping the Netra CP3250 Blade Server
- 2.3.2 Powering Off the Netra CP3250 Blade Server
- 2.3.3 Removing the Netra CP3250 Blade Server
- 2.3.4 Powering On the System
- 2.3.5 Automatic Power-Off Events
- 2.3.6 Servicing DIMMs
- 2.3.7 Installing the Optional Compact Flash Card
- 2.3.8 Installing Optional AMC
- 2.3.9 Adding or Replacing the Battery
- 2.3.10 Changing Jumper Settings
- 2.3.11 Checking DIP Switch Settings
- 2.3.12 Resetting the Netra CP3250 Blade Server
- Hardware Architecture
- Software Configuration
- Configuring and Using BIOS Firmware
- 5.1 About BIOS Settings
- 5.2 Changing the Configuration of a BIOS Menu Item
- 5.3 Setting the Boot Device Using BIOS Setup Screens
- 5.4 Setting Supervisor and User Passwords
- 5.5 Resetting the System Time and System Date
- 5.6 Updating the BIOS
- 5.7 Secondary BIOS Image
- 5.8 Perform a Live Firmware Upgrade
- 5.9 Power-On Self-Test
- 5.10 Changing POST Options
- BIOS Screens
- Physical Characteristics
- ShMM CLI and Commands
- Index
B-10 Sun Netra CP3250 Blade Server User’s Guide • April 2009
B.3.5.1 Zone 3 (J30) Connector Pin Assignments
TABLE B-6 shows the J30 connector pin assignments, used for power signals.
B.3.5.2 Zone 3 (J31) Connector PIN Assignments
TABLE B-7 shows the J31 connector pin assignments, used for ARTM signals.
TABLE B-5 J30 Pin Connector Assignments
1-3 4-6 Pin Length Mating Sequence
E PS1# NC short last
D +12V PP +12V PP long first
C IPMI_SCL_L IPMI_SDA
_L
medium Second
B Logic_GND +3.3V_MP long First
A Logic_GND Shelf_GND long First
TABLE B-6 J31 Connector Pin Assignments
Row Interface AB BG CD DG EF FG
1 AMC0
EO
RTM_TX13
+ (AMC0
EO_Rx1+)
RTM_TX13
- (AMC0
EO_Rx1-)
GND RTM_RX
12+
(AMC0
EO_Tx0+
)
RTM_RX
12-
(AMC0
EO_Tx0-)
GND RTM_TX12
+ (AMC0
EO_Rx0+)
RTM_TX12
- (AMC0
EO_Rx0-)
GND
2 AMC0
EO
RTM_RX14
+ (AMC0
EO_Tx2+)
RTM_RX14
- (AMC0
EO_Tx2-)
GND RTM_TX
14+
(AMC0
EO_Rx2+
)
RTM_TX
14-
(AMC0
EO_Rx2-
)
GND RTM_RX13
+ (AMC0
EO_Tx1+)
RTM_RX13
- (AMC0
EO_Tx1-)
GND
3 AMC0
EO
RTM_TX17
+ (AMC0
EO_Rx4+)
RTM_TX17
- (AMC0
EO_Rx4-)
GND RTM_RX
15+
(AMC0
EO_Tx3+
)
RTM_RX
15-
(AMC0
EO_Tx3-)
GND RTM_TX15
+ (AMC0
EO_Rx3+)
RTM_TX15
- (AMC0
EO_Rx3-)
GND
4 AMC0
EO
RTM_RX18
+ (AMC0
EO_Tx5+)
RTM_RX18
- (AMC0
EO_Tx5-)
GND RTM_TX
18+
(AMC0
EO_Rx5+
)
RTM_TX
18-
(AMC0
EO_Rx5-
)
GND RTM_RX17
+ (AMC0
EO_Tx4+)
RTM_RX17
- (AMC0
EO_Tx4-)
GND