Server User Manual
Table Of Contents
- Sun Netra™ CP3250 Blade Server User’s Guide
- Contents
- Figures
- Tables
- Preface
- Overview
- Hardware Installation and Service
- 2.1 Safety and Tool Requirements
- 2.2 Installing the Blade Server
- 2.3 Service Procedures
- 2.3.1 Hot-Swapping the Netra CP3250 Blade Server
- 2.3.2 Powering Off the Netra CP3250 Blade Server
- 2.3.3 Removing the Netra CP3250 Blade Server
- 2.3.4 Powering On the System
- 2.3.5 Automatic Power-Off Events
- 2.3.6 Servicing DIMMs
- 2.3.7 Installing the Optional Compact Flash Card
- 2.3.8 Installing Optional AMC
- 2.3.9 Adding or Replacing the Battery
- 2.3.10 Changing Jumper Settings
- 2.3.11 Checking DIP Switch Settings
- 2.3.12 Resetting the Netra CP3250 Blade Server
- Hardware Architecture
- Software Configuration
- Configuring and Using BIOS Firmware
- 5.1 About BIOS Settings
- 5.2 Changing the Configuration of a BIOS Menu Item
- 5.3 Setting the Boot Device Using BIOS Setup Screens
- 5.4 Setting Supervisor and User Passwords
- 5.5 Resetting the System Time and System Date
- 5.6 Updating the BIOS
- 5.7 Secondary BIOS Image
- 5.8 Perform a Live Firmware Upgrade
- 5.9 Power-On Self-Test
- 5.10 Changing POST Options
- BIOS Screens
- Physical Characteristics
- ShMM CLI and Commands
- Index
4-2 Sun Netra CP3250 Blade Server User’s Guide • April 2009
4.1 Operating Systems
The Sun Netra CP3250 blade server has been tested for compatibility with the
following operating systems:
■ Solaris™ 10 (05/08) Operating System (Solaris OS)
■ WindRiver Linux 3.1
■ RedHat Linux 5.2
■ Windows 2003
Refer to the Netra CP3250 Blade Server Product Notes (820-5194) for information on
Solaris OS and patches.
For information on versions of the Solaris OS, including installation, see the
appropriate Solaris Documentation Collection at the Sun Documentation web site at:
http://docs.sun.com
For information on the WindRiver Linux, RedHat Linux, and Windows operating
systems, see the documentation that came with the operating system.
4.2 Software Updates
Software updates and support information for the Sun Netra CP3250 blade server,
ARTMs, and the Netra CT 900 system can be found at the Sun Download Center:
http://www.sun.com/download
See the Netra CP3250 Blade Server Product Notes (820-5194) for information.
For information on your specific configuration, contact your local Sun Services
representative.
http://www.sun.com/service/contacting/solution.html