Computer Accessories User Manual

INSTALLING THE VTL VALUE APPLIANCE IN AN EQUIPMENT RACK

4 VTL Value Hardware Installation Guide • Aug 2007 A • 316196101

3. Push the slide-rail lock (A below) to release the inner rail, and start to pull the inner

rail out of the middle rail (

B).

4. Continue to pull the inner rail out of the middle rail (

C above) until it contacts the

internal stop (

D).

5. Press the Push Here button on the green mounting-bracket release (

E above), and pull

the mounting bracket free of the middle/outer rail assembly.

6. Repeat for the remaining slide-rail assembly.

Next task: “Attachingtheinnerrailsto these rverchassis”onpage 4.

▼ Attaching the inner rails to the server chassis

This procedure explains how to attach the inner rails to the server chassis. For each rail,

proceed as described below.