Computer Accessories User Manual

INSTALLING THE VTL VALUE APPLIANCE IN AN EQUIPMENT RACK

316196101 • A Chapter 1 Installing VTL Value hardware 15

4. Using a level (D above), align the server with the rails, and insert the inner rails into the

middle rails at the correct angle (

E below).

5. Have an assistant stand at the rear of the rack.

6. As you push the server into the rack, the assistant makes sure that the inner rails are

engaged with the ball-bearing retainers (

F below) and sliding on the bearings on both

slide rails.

The assistant makes sure that the rails are NOT merely pushing the ball-bearing retainers

back into the rail assembly (

G).

7. If there are problems, support the server with the mechanical lift, and realign the

chassis-mounted inner rails with the rack-mounted middle rails.

8. Once the inner rails are correctly engaged and riding on the bearings, slide the server

all the way into the rack to set the rail locks.