Computer Accessories User Manual
CHANGING THE IP ADDRESS OF THE ILOM SP
28 VTL Value Hardware Installation Guide • Aug 2007 A • 316196101
▼ Changing the IP address of the ILOM
1. When the Integrated Lights Out Manager page appears, press the
Configuration button (
A below).
2. On the Network Settings panel, click the Use the Following IP Address
radio button (
B above).
3. Change the default IP Address and Subnet Mask shown to the IP address and
subnet mask specified by the customer (
C above).
4. Press Save (
D above).
5. Pass the ILOM IP address and subnet mask on to the rest of the engagement team.
The storage systems engineer will need this information when configuring the VTL software.
Next task: “C ha ng in g theILOMpassword”onpage 29.
A
10.0.0.100
255.255.255.0
B
C
D