Computer Accessories User Manual

44 VTL Value Hardware Installation Guide • Aug 2007 A • 316196101
Note – If you connect a terminal or emulator to the serial port before it has been powered up
or during its power-up sequence, you will see bootup messages.
Whenthe systemhasbooted,theILOMdisplaysitslog inprompt:
SUNSPnnnnnnnnnn login:
Thefirststringinthepromptisthedefaulthostname.Itconsistsoftheprefi xSUNSP
andtheILOM’sMACaddre ss.
4. Log in to the CLI as root and enter the root password.
Whenyouhavesuccessfullylogged in,the SPdisplaystheILOMdefaultcommand
prompt :
->
The ILOM is now accessing the CLI. You can now run CLI commands.
For example, to display status information about the motherboard in your server, type the
following command:
-> show /SYS/MB
Use the ILOM commands to configure the server’s user accounts, network settings, access
lists, alerts, and so on. For detailed instructions on CLI commands, see the Integrated Lights
Out Manager (ILOM) Administration Guide, 819-1160.
5. To go to the host serial console (host COM0), type the following commands:
cd /SP/console
-> start
Note – After you have returned to the serial console, to switch back to the CLI, enter the
Escape and left parenthesis [ ( ] key in rapid succession.