Ethernet MMF/UTP Adapter Installation and User's Guide

Chapter 5 Configuring VLANs 61
2. Use the ifconfig(1M) to configure a VLAN virtual device, for example:
The output of ifconfig -a on a system having VLAN devices ipge123000 and
ipge224000:
3. On the switch, set VLAN tagging and set VLAN ports to coincide with the VLANs
you have set up on the server.
Using the examples in Step 2, you would set up VLAN ports 123 and 224 on the
switch.
Refer to the documentation that came with your switch for specific instructions for
setting VLAN tagging and ports.
# ifconfig ipge123000 plumb up
# ifconfig ipge4000 plumb up
# ifconfig -a
ipge4000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500
index 5
inet 0.0.0.0 netmask ff000000
ether 0:3:ba:d8:d3:a6
ipge123000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500
index 4
inet 0.0.0.0 netmask ff000000
ether 0:3:ba:d8:d3:a6