Server User Manual

226 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004
SP Update Diags Subcommand
Description: Updates the current version of diagnostics available.
While the SP functions normally without access to an external file system, a file
system is required to enable several features, including diagnostics. The SP software
uses a default version of diagnostics. However, if a new version is released and
stored on the Network Share Volume, you must explicitly point to that new version
to use it.
Format
Command format:
sp update diags {-p | --path} <PATH_TO_DIAGS_FOLDER>
TABLE H-98 lists the argument for this subcommand.
Return Codes
TABLE H-99 lists the return codes for this subcommand.
TABLE H-98 Argument for Subcommand sp update diags
Argument Description
{-p | --path} Points to the location of the new diagnostics.
TABLE H-99 Return Codes for Subcommand sp update diags
Return Code ID Description
NWSE_Success 0 Command successfully completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter usage, conflicting options
specified.
NWSE_InvalidArgument 4 One or more arguments were incorrect or invalid.
NWSE_UnknownError 15 Miscellaneous error not captured by other errors.