- Sun Installation and User's Guide GigaSwift Ethernet Adapter

Appendix B Using the Sun GigaSwift Ethernet Driver in Solaris 9 x86 Operating Systems 83

Note – After the installation script runs, you see a summary of the software package

or patch that was installed. You can also find a log of the installation in /var/tmp.

The log file information is displayed when the installation completes unless the

software meets or exceeds the required package or patch level.

Example: All Requirements Met on Solaris x86 Systems

Following is an example of an installation script output if the driver and patch

requirements are met on the Solaris 9 x86 Operating System:

CODE EXAMPLE B-1 Script Output for x86 Systems When Requirements Are Met

Product Installation

1 - Dual Gigabit Ethernet Dual SCSI/P Adapter

2 - GigaSwift Ethernet Adapter (copper/fiber)

3 - GigaSwift Ethernet Compact PCI Adapter

4 - Quad GigaSwift Ethernet Adapter

Please select the product to install: 2

GigaSwift Ethernet Adapter Driver Installation.

Use is subject to license terms.

*** Checking for correct version of GigaSwift Ethernet Driver

Packages...

*** Checking for correct version of GigaSwift Ethernet Driver

Patches...

*** Checking for correct version of VLAN Utility Driver Packages..

*** Checking for correct version of VLAN Utility Driver Patches...

The CE/VLAN driver(s) installed on this system for:

GigaSwift Ethernet Adapter Driver

meets or exceeds the required package or patch version. No changes

to the system are required - exiting.