- Sun Installation and User's Guide GigaSwift Ethernet Adapter

86 Sun GigaSwift Ethernet Adapter Installation and User’s Guide • August 2004
3. Determine if the ce and vlan drivers are installed on the system:
4. Install the software packages by typing the following at the command line:
A menu similar to the following displays:
5. Select the packages you want to install:
■ Press Return or type all to accept the default and install all packages.
■ Type the numbers of all but the optional packages if you prefer not to install
them.
6. Reboot the system:
#/usr/bin/pkginfo SUNWced SUNWvld
system SUNWced Sun GigaSwift Ethernet Adapter
system SUNWvld Sun GigaSwift Ethernet Adapter
# /usr/sbin/pkgadd -d /cdrom/cdrom0/GigaSwiftEthernet/Solaris_9/i386/Packages/
The following packages are available:
1 SUNWcea Sun GigaSwift Ethernet Adapter Driver 32 bit adb Macros
(i386) 1.0,REV=2001.05.04
1 SUNWced Sun GigaSwift Ethernet Adapter Driver (32-bit Driver)
(i386) 1.0,REV=2001.05.04
2 SUNWcedu Sun GigaSwift Ethernet Adapter Driver Headers
(i386) 1.0,REV=2001.05.04
3 SUNWcem Sun GigaSwift Ethernet Adapter Driver Man Pages
(i386) 1.0,REV=2001.05.04
4 SUNWvld Sun Ethernet Vlan Utility Routines
(i386) 1.0,REV=2001.05.04
5 SUNWvldu Sun Ethernet Vlan Utility Headers
(i386) 1.0,REV=2001.05.04
Select package(s) you wish to process (or ’all’ to process
all packages). (default: all) [?,??,q]:
ok boot -r