- Sun Installation and User's Guide GigaSwift Ethernet Adapter

10 Sun GigaSwift Ethernet Adapter Installation and User’s Guide • August 2004

2. List the network devices on your system.

You should see the full path name of the network devices, similar to the example

below. In this example, the network@0 and the network@1 devices are the Sun

GigaSwift Ethernet adapter, and the network@2 is the onboard Ethernet device.

/pci@8,600000/network@1 identifies the Ethernet port

Note – If you do not see the device listed, check that the adapter is properly seated.

If necessary, reinstall the adapter.

3. View the device that you installed.

Using the previous example, type:

ok show-nets

a) /pci@8,600000/network@1

b) /pci@8,700000/network@5,1

q) NO SELECTION

Enter Selection, q to quit:

cd /pci@8,600000/network@1