- Sun Installation and User's Guide GigaSwift Ethernet Adapter

22 Sun GigaSwift Ethernet Adapter Installation and User’s Guide • August 2004
● Use the modinfo command to verify that you have the current driver (v1.136 or
later) installed.
If you type grep CE, using uppercase letters, you will get only the specific driver
information:
If you type grep ce, using lowercase letters, you will still get the driver version
information, but you will also get several lines of additional information. Your
output will be similar to the following. The line showing the driver version is in bold
italics.
Configuring the Network Host Files
After installing the driver software, you must create a hostname.cenumber file
(Where
number = the instance number of the ce interface.) for the adapter’s Ethernet
interface. You must also create both an IP address and a host name for its Ethernet
interface in the /etc/hosts file.
# modinfo |grep CE
84 7821c000 4f9a6 75 1 ce (CE Ethernet Driver v1.136)
# modinfo |grep ce
11 1018bacb 1f7 - 1 fssnap_if (File System Snapshot Interface)
12 1018bc1b 10900 1 1 rpcmod (rpc interface str mod)
13 10199c5b 66f10 3 1 ip (IP Streams device)
35 1026ba5c 1ae7 - 1 busra (Bus Resource Allocator (BUSRA) )
36 1026d290 c4c - 1 hpcsvc (hot-plug controller services v1)
47 102663c6 304 143 1 ip6 (IP Streams device)
48 10296ed4 25e08 42 1 tcp (TCP Streams device)
50 1026650a 365 146 1 tcp6 (TCP Streams device)
51 10278264 9968 41 1 udp (UDP Streams device)
52 10234ef7 365 145 1 udp6 (UDP Streams device)
53 10280174 7f10 5 1 icmp (ICMP Streams device)
54 102666af 30e 144 1 icmp6 (ICMP Streams device)
56 10260029 4bfb 10 1 timod (transport interface str mod)
71 102f6d1d 1c30 43 1 rts (Routing Socket Streams device)
84 7821c000 4f9a6 75 1 ce (CE Ethernet Driver v1.136)
115 10232ced dc6 24 1 pts (Slave Stream Pseudo Terminal dr)