User's Manual
Table Of Contents
- Sun StorageTek™ Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide
- Contents
- Declaration of Conformity
- Safety Agency Compliance Statements
- Safety Precautions
- Conformité aux normes de sécurité
- Mesures de sécurité
- Symboles
- Modification du matériel
- Positionnement d’un produit Sun
- Niveau de pression acoustique
- Conformité SELV
- Connexion du cordon d’alimentation
- Mise en garde relative aux batteries
- Couvercle de l'unité
- Mise en garde relative au système en rack
- Avis de conformité des appareils laser
- Périphériques CD et DVD
- Einhaltung sicherheitsbehördlicher Vorschriften
- Normativas de seguridad
- Medidas de seguridad
- Símbolos
- Modificaciones en el equipo
- Colocación de un producto Sun
- Nivel de ruido
- Cumplimiento de la normativa para instalaciones SELV
- Conexión del cable de alimentación
- Advertencia sobre las baterías
- Cubierta de la unidad del sistema
- Advertencia sobre el sistema en bastidor
- Aviso de cumplimiento de la normativa para la utilización de láser
- Dispositivos de CD y DVD
- Nordic Lithium Battery Cautions
- Nordic Power Distribution Cautions
- Nordic Grounded Socket Cautions
- Regulatory Compliance Statements
- Preface
- HBA Overview
- Hardware Installation and Removal
- HBA Software Installation
- Known Issues
- Cannot Detect the HBA on the Sun Blade T6300 System (6680542)
- The PEM Might Not Come Online on a Sun Blade T6300 or T6320 System (6683536)
- Cannot Detect the HBA Through the BIOS on the Sun Blade X8450 System (6704510)
- Cannot Verify the FCode Version of the HBA on the Sun Blade T6300 and T6320 Systems (6686545)
20 Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008
1. Use the cfgadm command to identify the HBA to be removed.
2. Use the cfgadm -c unconfigure command to unconfigure the attachment
point ID (Ap_Id) for the HBA.
3. Use the cfgadm -c disconnect command to prepare the HBA for removal.
A flashing Power indicator LED indicates that the HBA is being prepared for
removal. A dark Power indicator LED indicates that the HBA is ready to be
removed.
▼ To Remove the HBA Hardware
1. Disconnect all cables.
2. Press the HBA latch to disengage the HBA, and then pull forward and down to
eject it.
You can now remove the HBA.
cfgadm
Ap_Id Type Receptacle Occupant Condition
pcie5 fibre/hp connected configured ok
pcie6 fibre/hp connected configured ok