Storage Subsystems Troubleshooting Guide

118 Sun StorEdge 3900 and 6900 Series Troubleshooting Guide • March 2002
t3 disk State
Change+
disk.u1d5 in Sun
StorEdge T3+ array
rasd3-t3b1
(ip=xxx.0.0.41)is
now Available
(status-state changed
from fault-
disabled to ready-
enabled)
t3 interface.
loopcard
State
Change+
[
Info ]
loopcard.u1l1(SLR
-MI.375-0085-01-
G-G4.070924)inT3
msp0-t3b0
Information: The Sun
StorEdge T3+ array
has reported that a
loopcard has been
replaced or brought
back online.
t3 volume State
Change+
’volume.u1vol1
(
slr-mi.370-3990-
01-e-
f0.022542.u1vol1
)
in T3 dvt2-t3b0
(ip=192.168.0.40)
is now Available
status-state changed
from unmounted to
mounted)
t3 power State
Change+
power.u1pcu2’TEC
TROL-CAN.300-
1454-
01(50).008275)in
T3 rasd2-t3b1
(ip=xxx.0.0.41)is
now Available status-
state changed from
ready-disable to
ready-enable).
Category Component EventType Sev Action Description Information