Computer Hardware User Manual

Modify the Adapter properties, as described in “Modifying the TCP/IP HL7 Adapter Properties in
the Connectivity Map”on page 29
.
Modifying the TCP/IP HL7 Adapter Properties in the
Connectivity Map
You can modify an Adapter's properties after it is created in the Connectivity Map. The
properties you modify in the Connectivity Map apply only to the specic Adapter you are
conguring. For information on modifying system-wide Adapter properties, see
“Conguring
Sun Adapter for TCP/IP HL7 Environment Properties” on page 91
.
Tip – A description of each parameter is displayed in the Description box when that parameter is
selected, providing an explanation of any required settings or options. Properties are also
described in the following topics:
■
“TCP/IP HL7 V2 Adapter Inbound Connectivity Map Properties” on page 30
■
“TCP/IP HL7 V2 Adapter Outbound Connectivity Map Properties” on page 49
■
“TCP/IP HL7 V3 Adapter Inbound Connectivity Map Properties” on page 64
■
“TCP/IP HL7 V3 Adapter Outbound Connectivity Map Properties” on page 79
FIGURE 1 AdapterLocation
6
Adding and Conguring a TCP/IP HL7 Adapter in a Connectivity Map
Sun Adapter for TCP/IP HL7 User's Guide 29