Computer Hardware User Manual
TABLE 43 Connectivity Map - TCPIP Outbound Settings (V3) - Client Connection Establishment
(Continued)
Name Description
Always Create New
Connection
An indicator of whether the adapter always attempts to create a new connection
when a connection establishment request is received. Select on of the following
options:
■
true – The adapter always attempts to create a new connection without
attempting to match an existing connection.
■
false – The adapter attempts to match an existing connection (managed by
the container).
Auto Reconnect Upon
Matching Failure
An indicator or whether to attempt to reconnect automatically when the adapter
gets a matching connection from a container, even though this connection is not
valid; for example, the external side of the connection is closed or reset due to the
external application’s logic.
Select one of the following options:
■
true – The adapter discards the invalid matching connection and
automatically attempts to reconnect using a new connection.
■
false – The adapter does not automatically attempt to reconnect using a new
connection. Instead, the adapter defers the reconnect control to the user
business rules. It is up to the business rules to detect this type of failure and act
appropriately.
Max Connection Retry The maximum number of times the adapter attempts to connect to a specic
external TCP/IP destination (host/port) before giving up.
Retry Connection
Interval
The length of time (in milliseconds) the adapter waits between attempts to
connect to a specic external TCP/IP destination (host or port).
TCPIP Outbound Settings - Server Port Binding —
TCP/IP HL7 V3 Outbound Adapter
The following table lists and describes the properties that appear on the Server Port Binding
page of the Properties Editor accessed from the Connectivity Map. The properties dene the
server port binding retry options. This section is only used when the Connection Type under
TCPIP Outbound Settings is set to Server.
TABLE 44 Connectivity Map - TCPIP Outbound Settings (V3) - Server Port Binding
Name Description
Max Binding Retry The maximum number of times the adapter will attempt to bind to the specied
TCP/IP port on the localhost before giving up.
TCP/IP HL7V3 Adapter Outbound Connectivity Map Properties
Sun Adapter for TCP/IP HL7 User's Guide • October 200984