Computer Hardware User Manual
TABLE 44 Connectivity Map - TCPIP Outbound Settings (V3) - Server Port Binding (Continued)
Name Description
Retry Binding Interval The amount of time (in milliseconds) that the adapter waits between attempts to
bind to the specied TCP/IP port on the localhost.
HL7 Acknowledgment — TCP/IP HL7 V3 Outbound
Adapter
The following table lists and describes the properties that appear on the HL7 Acknowledgment
page of the Properties Editor accessed from the Connectivity Map. These properties dene how
the application acknowledgment events are handled.
TABLE 45 Connectivity Map - HL7 Acknowledgement (V3)
Name Description
Acknowledgment Level The acknowledgment type provided by the Java Collaboration. Select one of the
following types:
■
Immediate
■
Deferred
■
Queued
Lower Layer Protocol — TCP/IP HL7 V3 Outbound
Adapter
The following table lists and describes the properties that appear on the Lower Layer Protocol
page of the Properties Editor accessed from the Connectivity Map. These properties dene the
Lower Layer Protocol (LLP) conguration.
TABLE 46 Connectivity Map - Lower Layer Protocol (V3)
Name Description
LLP Type The lower layer protocol (LLP) type. The supported option is MLLP v2.0
(Minimal Lower Layer Protocol v2.0).
For more information on MLLP v2.0, see
“Lower Layer Protocol” on page 23.
Start Block Character The rst envelope marker character in the HL7 envelope, as a decimal ASCII
number. Enter a number from 1 to 127. Unless there is a conict, the value should
be ASCII VT (decimal 11).
TCP/IP HL7V3 Adapter Outbound Connectivity Map Properties
Sun Adapter for TCP/IP HL7 User's Guide 85