User's Manual

12-6 UltraEnterprise6000/5000/4000 Systems Manual—November1996

12.3.5 Rear Screen Panel

To remove the rear screen panel:

1. Remove the two #10 Phillips screws securing the panel to the frame.

See Figure 12-3.

2. Tilt the panel top out and lift it free of the chassis. Set the panel aside.

There is a flange on the bottom of the rear screen.

Figure 12-3 Removing the Rear Screen Panel

Note – If your cabinet has a hinged rear door, remove the pins from the hinges

and lift the door free of the chassis. Reverse this procedure to replace the door.

To replace the rear screen panel:

1. Insert the panel so the bottom flange engages behind the top of the kick

panel.

2. Tilt the panel flush against the frame and secure using Phillips screws.

#10 Phillips screws

Kick panel