User's Manual

12-12 UltraEnterprise6000/5000/4000 Systems Manual—November1996
12
12.4 InternalAccess-Enterprise4000System
The Enterprise 4000 system has a top bezel that must be removed to access the
SCSI tray and the keyswitch tray.
12.4.1 Top Bezel
To remove the top bezel:
1. Grasp the bottom corners of both sides of the top bezel and pull it toward
you.
Apply inward pressure to release the snap locks on each side.
2. Tilt the top bezel upward to a 45
o
angle and remove the bezel.
Set the bezel aside. See Figure 12-8.
Figure 12-8 Removing the Top Bezel/Panel
To replace the top bezel, reverse these instructions.